This is a specific conversation about Automatic pet feeders — what to look for — ask about yours and get one honest answer for your exact situation.
inparticular.ai
A Flemish Giant needing large pellet portions is exactly where standard automatic feeders fall apart — the hoppers are too small, the dispensing wheels jam on anything over 8mm, and you end up with a hungry rabbit and a broken mechanism. The most important things to get right with any feeder are portion accuracy, ease of cleaning, and mechanical reliability, because cheap units fail on all three counts quickly. Before I point you in the right direction: is this for home use while you're at work, for travel cover, or are you trying to lock in consistent daily portions for weight management?
It's mainly for work days — I'm out about 10 hours and I want him to get his midday pellets reliably. He's on about 250g of pellets a day total, so maybe 80g at lunchtime. He's a big lad, about 7kg.
inparticular.ai
Got it — one scheduled midday meal, 80g of pellets, for a 7kg Flemish Giant. That's a meaningful portion and you need a feeder with a large enough dispensing chamber that it doesn't bridge or jam. What size pellets is he on? Standard rabbit pellets tend to be around 8–10mm, but some of the larger Flemish Giant formulas run bigger, and that matters a lot for which feeder will actually cope.
He's on Supreme Science Selective, the standard rabbit pellets. They're about 8–9mm I'd say. I've already tried two cheap feeders and both jammed within a week.
inparticular.ai
That's a very common story with budget feeders — the rotor gaps are sized for cat kibble, not rabbit pellets, and they bind up fast. For your setup I'd recommend the Orsda 6L Automatic Pet Feeder. It has a large-diameter dispensing rotor that handles pellets up to around 12mm without jamming, a 6-litre hopper which is ample for a Flemish Giant's weekly supply, and the portion programming is reliable enough for a single scheduled meal. Crucially, the hopper and food chute detach fully for washing, which matters for hygiene with pellets that can go stale or damp. It's available on Amazon UK for around £45–50. It's not marketed for rabbits specifically, but the mechanics suit large pellets far better than anything in the dedicated small-animal feeder category.
That sounds promising. Will 80g actually dispense accurately, or will it be off by a lot?
inparticular.ai
With the Orsda and a uniform pellet like Supreme Selective, you'll typically see portion accuracy within about 10–15% — so 80g might come out as 72–88g in practice. That's fine for a maintenance-fed adult rabbit where you're not managing a medical condition. The key is to run a few test portions when you first set it up, weigh what actually dispenses, and adjust the programmed serving size up or down to hit your target. Don't skip that calibration step — it's how you get consistency from any gravity-rotor feeder regardless of price.
Good to know. Is there anything I should watch for once it's set up?
inparticular.ai
Two things worth keeping an eye on. First, pellet dust and fines can build up in the rotor housing over time and eventually cause bridging — give the chute and rotor a quick wipe every couple of weeks and a proper wash monthly. Second, Flemish Giants are smart and persistent; make sure the feeder is positioned so he can't tip it or work the hopper lid open between meals. A corner placement or a light cable tie through the lid latch sorts that. Beyond that, it should run reliably for daily use. Good luck with him — Flemish Giants are brilliant animals.
